Installation And Connections - Panasonic BM-ET300AE Operating Instructions Manual

INSTALLATION AND CONNECTIONS

WARNING
The installation described in these figures should be made by qualified service personnel or trained system installers.
Caution: Attach this iris camera to a flat wall with the supplied mounting bracket. After the installation, secure the camera to
prevent dropping.
Note: These operating instructions only describe how to install the iris camera to the wall. This camera will not operate properly
if you do not complete the setup. Refer to the setup manual (PDF file) supplied to the optional administration software.
DB
Administration
Software
REJECT
BM-ET300AE
(for enrollment)
● Description about the Connection Example
• When the power supply is shut down, an alarm signal is supplied from the alarm output 1 (power status) to alarm devices.
• When the front cover is removed from an iris camera or the camera is removed from the wall, an alarm signal is sent from
the alarm output2 (tamper detection) to alarm devices.
• When recognition is not successfully completed, an alarm signal is sent from the recognition result output2 (REJECT) to a
digital disk recorder. Then, the digital disk recorder automatically records the images output from the video surveillance
camera.
System Instruction
Iris Server
LAN
LAN
ACCEPT
Access Control
LAN
LAN
Wiegand
REJECT ACCEPT
Wiegand
Card Reader *
BM-ET300AE
(for recognition)
Wiegand
REJECT ACCEPT
Wiegand
Card Reader *
BM-ET300AE
(for recognition)
* These products are independent to BM-ET300AE.
Access Control
Server *
Panel *
Electric Lock*
15