1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Software
  5. BB-HNP60
  6. Operating instructions manual

Panasonic BB-HNP60 Operating Instructions Manual

Network camera recorder
Hide thumbs Also See for BB-HNP60:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions
Network Camera Recorder

Operating Instructions

BB-HNP60
Model No.
Please read this manual before using and save this manual for future
reference.
In this manual, the suffix of each model number is omitted.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic BB-HNP60

Summary of Contents for Panasonic BB-HNP60

  • Page 1: Operating Instructions

    Network Camera Recorder Operating Instructions BB-HNP60 Model No. Please read this manual before using and save this manual for future reference. In this manual, the suffix of each model number is omitted.
  • Page 2 LICENSE: (1) You may use the SOFTWARE solely for the purpose of recording and processing images from one or more PANASONIC Network Cameras which are compatible with the SOFTWARE. (2) You may make a copy of the SOFTWARE for the use defined in subparagraph (1) above, or for internal back-up purpose only.
  • Page 3 Panasonic Sales Company within such ninety (90) days period, along with a copy of the receipt showing your date of purchase.
  • Page 4 PANASONIC MAKES NO WARRANTY THAT THE SOFTWARE WILL BE ERROR-FREE OR THAT IT WILL MEET YOUR REQUIREMENTS. PANASONIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY YOU INCLUDING, BUT NOT LIMITED TO, CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES, EVEN IF PANASONIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Page 5 System Requirements PC (Personal Computer) must meet the following technical specifications to use Network Camera Recorder. Item Operating System Specification of the PC (Recommendation) Memory Free area of a hard disk Note The above-mentioned conditions vary according to recording situations or system configuration.

  • Page 6: Table Of Contents

    Operating Instructions Table of Contents 1 Product Introduction ... 8 1.1 Main Features... 9 1.2 Network Camera Recorder Installation... 11 1.2.1 Looking at Installation Procedure ...11 1.2.2 Checking Included Accessories ...12 1.2.3 Installing Network Camera Recorder ...13 1.2.4 Uninstalling Network Camera Recorder ...16 1.3 How to Start and Close Network Camera Recorder ...
  • Page 7 Operating Instructions 2.4.8 Searching for Recorded Image ...58 2.4.9 Extracting JPEG Files from an MJP File ...59 2.4.10 Controlling Playback Speed ...60 2.4.11 Deleting the Recorded Image...61 3 Practical Operation... 63 3.1 Printing the Recorded Image... 64 3.2 Multi-Camera Recording... 67 3.3 Copying or Moving the Recorded Image ...

  • Page 8: Product Introduction

    Operating Instructions Section 1 Product Introduction...

  • Page 9: Main Features

    Recorded images can be searched for by their recording time. Network Camera with preset positioning and zooming supported ( and page 43) Preset positioning and zooming features of Panasonic Network Cameras (HCM series) are available for use. page 67) page 52)
  • Page 10 Operating Instructions Setting Hard Disk Capacity for Recording ( A maximum hard disk capacity for recording can be set. Automatic Backup ( Recorded images can be backed up automatically at a specified time. page 49) page 48)

  • Page 11: Network Camera Recorder Installation

    1.2 Network Camera Recorder Installation 1.2.1 Looking at Installation Procedure You must perform the following steps to use Network Camera Recorder. Read the End-User License Agreement. ( You cannot install Network Camera Recorder if you disagree. (The legal agreement is required when installing Network Camera Recorder.) Install Network Camera Recorder.

  • Page 12: Checking Included Accessories

    Operating Instructions 1.2.2 Checking Included Accessories The following items are provided. • CD-ROM • Operating Instructions • Registration code stickers* * User registration requires registration code shown on registration code stickers. Affix the stickers to the case, the front or the back of Operating Instructions to remember registration code and password.

  • Page 13: Installing Network Camera Recorder

    1.2.3 Installing Network Camera Recorder Insert the CD-ROM to the CD-ROM drive. • Installation Selection window automatically appears. Notes • If Installation Selection window does not appear, open "ncr" folder on the CD-ROM and double-click "ncrsetup_en.exe" file. Installation window appears. •...
  • Page 14 Operating Instructions Click [Next>]. • License Agreement window appears. Check [I Agree] and click [Next>]. • Choose Destination Location window appears. • Click [Browse] to change the destination folder and choose the destination. • Confirm that the hard disk capacity is 600 MB or greater. •...
  • Page 15 Click [Next>]. • Start Installation window appears. Click [Next>]. • Installation Complete window appears. Operating Instructions...

  • Page 16: Uninstalling Network Camera Recorder

    Camera Recorder]. Follow the steps on the windows. Note When performing version upgrade of Network Camera Recorder, uninstall by checking [Automatic] before installing a new version. Camera definitions and recorded images will not be deleted. [Program] [NCR] [Uninstall Panasonic Network...

  • Page 17: How To Start And Close Network Camera Recorder

    Double-click the Network Camera Recorder Icon on the desktop. • Network Camera Recorder screen appears. Select [File] Notes • Several Network Camera Recorders cannot be activated simultaneously. • You can also start by selecting [Start] [Panasonic Network Camera Recorder]. [Exit] on the menu bar. Operating Instructions [Program] [NCR]...

  • Page 18: User Registration

    Operating Instructions 1.4 User Registration Without the user registration, the number of Network Cameras that can be configured are only four, and Network Camera Recorder cannot be used beyond the limitation of 30 minutes. Operate the user registration entering the registration code and the password.
  • Page 19 Select [Help] [Enter Registration Code...]. • Enter Registration Information window appears. Enter the registration code and the password. Click [OK]. • Information dialog box appears. Click [OK] and restart Network Camera Recorder. Notes • When the registration code and password are wrong, Error dialog box appears.

  • Page 20: Folder Selection To Save The Image

    Operating Instructions 1.5 Folder Selection to Save the Image Network Camera Recorder can save images to the hard disk. It can also save images to the external memory device specifying the folder. You can configure new Network Cameras creating subfolders. ( Notes •...
  • Page 21 Select your destination drive and folder and click • button creates a subfolder under the selected folder. Enter a new subfolder name and click [OK]. • A subfolder will be created under the selected folder. Click [OK]. Notes • When you monitor Network Camera or play back recorded images that is specified to the different folder, specify the same folder by selecting [Select Camera Database].
  • Page 22 Operating Instructions Selecting an existing folder Select your destination drive and folder, and click [OK]. When selecting the folder that already has a "webcams.def" file with [Copy existing camera definitions] checked, the following message appears. Click [Yes] to overwrite camera definitions. Notes •...

  • Page 23: Network Camera Recorder Screen

    Operating Instructions Section 2 Network Camera Recorder Screen...

  • Page 24: Network Camera Recorder Screen

    Operating Instructions 2.1 Network Camera Recorder Screen 2.1.1 Using Image Page (12) Menu bar Toolbar buttons ( [Image]/[Thumbnails]/[Search Results] tab [Image] tab: displays Image Page. [Thumbnails] tab: displays Thumbnails Page. ( [Search Results] tab: displays searched images. ( Window Size buttons ( Recording buttons ( Operation Bar ( The window of a camera image...
  • Page 25 • When monitoring Current date and time are displayed. • When staying stopped Date and time of the last image are displayed. • When displaying JPEG file Recorded date and time, the elapsed time and the number of JPEG files are displayed. •...
  • Page 26 Operating Instructions Toolbar buttons [Prev Cam] displays the previous Network Camera. [Next Cam] displays the next Network Camera. [New Cam] configures a new Network Camera. ( [Edit Cam] changes the setting of a Network Camera. page 36) [Top Page] displays Top Page of a Network Camera.
  • Page 27 Window Size buttons Window Size Buttons adjusts the window size of Network Camera Recorder screen. (1) (2) (3) (4) (5) (1) Fits the image to the window size all the time. (2) Adjusts the image to the window size. If the window size is over actual image size, the image does not expand more than 100 %.
  • Page 28 Operating Instructions Playback buttons Playback buttons play back recorded images. ( (1) Displays a first image. (2) Displays a previous image. (3) Plays back recorded images. Click again to pause. (4) Displays a next image. (5) Displays a latest image. Connection buttons Connection buttons starts and stops monitoring the Network Camera.

  • Page 29: Using Thumbnails Page

    2.1.2 Using Thumbnails Page [Refresh] refreshes latest recorded images on Thumbnails Page. The thumbnails disappear temporarily by clicking [Refresh]. [Load Thumbs] loads recorded images and displays them. Checking Autoload thumbs check box enables recorded images to be loaded automatically. A recorded image on display depends on its recording file format (MJP or JPG) as shown below.

  • Page 30: Using Search Results Page

    Operating Instructions 2.1.3 Using Search Results Page Search Results Page displays searched images as a result of searching for images. Refer to page 58 for searching for recorded images. • Displaying search results with their filenames Displays date and time. (e.g., April 8th 13:00) Displays date, time, second and centisecond.

  • Page 31: Using Camera List

    2.1.4 Using Camera List Camera List displays Camera Previews of configured Network Cameras. (1) Camera Preview The frame of the selected Camera Preview turns blue. Camera Preview displays the current image in monitoring. Camera Preview displays the latest image or recorded image when stopping monitoring.
  • Page 32 Operating Instructions Changing Camera Preview Size Camera Preview size in the Camera List can be changed. 1. Select [File] the menu bar. 2. Click your desired Camera Preview size. Camera Preview will be displayed with the selected size. [Camera Preview Size...] on...

  • Page 33: Network Camera Configuration

    2.2 Network Camera Configuration 2.2.1 Configuring a New Network Camera Before you can view or record images, each Network Camera must be configured within Network Camera Recorder. • Specify a folder to save images ( Camera. Configuring a new Network Camera Click [New Cam] or select [Edit] •...
  • Page 34 Operating Instructions Camera Type Select the Network Camera type (with Pan/Tilt feature, without Pan/ Tilt feature or with zooming feature). IP address Enter the IP address of Network Camera. Enter "IP address (or domain name):Port number". (When port number is 80 [default], you do not need to enter port number.) •...
  • Page 35 When you set security setting (authentication setting), check the Authentication box and enter user name (ID) and password. • Enter the alphanumeric characters. • 4 to 15 characters • [Space], ["], [’], [#], [&], [%], [=], [?], [<], [>] and [:] are not available.

  • Page 36: Editing The Network Camera

    Operating Instructions 2.2.2 Editing the Network Camera Select Camera Preview in the Camera List to edit and click [Edit Cam] or [Edit] [Edit Current Camera] on the menu bar. • Edit Camera window appears. • Refer to page 34 for each parameter. Edit the parameters and click [OK].

  • Page 37: Changing Default Camera Settings

    2.2.3 Changing Default Camera Settings Default camera settings can be modified. The settings here will be displayed as the default camera settings of newly configured Network Cameras. Select [File] Set each setting and click [OK]. Refer to page 34 for each parameter. Note Click [Restore Factory Defaults] when restoring factory default settings.

  • Page 38: Setting The Proxy Server

    Operating Instructions 2.2.4 Setting the Proxy Server You need to set the following settings to monitor Network Camera on the Internet when you use a proxy server. (You cannot connect Network Camera without setting the proxy server.) Select [File] • Proxy Settings window appears.

  • Page 39: Deleting A Configured Network Camera

    2.2.5 Deleting a Configured Network Camera There are four kinds of methods to delete the configured Network Cameras. (1) Delete the current displayed Network Cameras. (2) Delete the selected Network Cameras. (3) Delete all disabled Network Cameras. (4) Delete all configured Network Cameras. Select Camera Previews in the Camera List to delete.
  • Page 40 Operating Instructions Click [Yes]. Confirmation dialog box appears. Click [Yes]. • Network Camera Recorder deletes all recorded images of the selected Network Cameras.

  • Page 41: Network Camera Monitoring

    • • • Buttons will not be displayed if [Panasonic HCM series without Pan/Tilt] is selected for Camera Type on Edit Camera window. They also cannot be controlled if [Disable] is selected on Camera Setup window in Network Camera. Buttons apply only to Network Camera with zooming and focusing feature. They will be displayed when selecting [Panasonic HCM series with Zoom] for Camera Type on Edit Camera window.

  • Page 42: Using Preset Buttons

    Operating Instructions 2.3.2 Using Preset Buttons The preset buttons set in Network Camera can be used. Press a preset button on the operation bar to view the preset position at the center of the image field. Preset buttons allow you to move the lens to the positions set in Network Camera. Right- click a preset button and click [refresh] to gain its latest setting.

  • Page 43: Zooming And Focusing

    2.3.3 Zooming and Focusing Zooming in and out (Only for Network Camera with zooming and focusing feature) Tele Zoom buttons increases or decreases the size of the object. Tele button zooms in (maximum Wide 21x), and Wide button zooms out. Clicking the buttons allows you to zoom in or out the image by 10 steps.

  • Page 44: Monitoring The Network Camera

    Operating Instructions 2.3.4 Monitoring the Network Camera Click Camera Preview in the Camera List to select a Network Camera. The frame of the selected Camera Preview turns blue. Click • Start monitoring Network Cameras. Click to quit. • Stop monitoring Network Cameras. Notes •...

  • Page 45: Using Camera Bar

    2.3.5 Using Camera Bar The Camera Bar displays images of all active Network Cameras that are configured. This feature allows you to view multiple images simultaneously. You can monitor Network Camera on the Camera Bar though you minimize Network Camera Recorder even if another application is in use. Setting Network Camera on the Camera Bar Click [CamBar].
  • Page 46 Operating Instructions Deleting Network Camera on the Camera Bar • Deleting selected Network Cameras Right-click the image of Network Camera to delete on the Camera Bar and select [Delete from Cambar]. • Camera Bar deletes the selected Network Camera. • Deleting all Network Cameras Click the Camera Bar Icon on the upper left corner on the Camera Bar.
  • Page 47 Commands on the Camera Bar • Commands for selected Network Camera Right-click the image of Network Camera. • Commands for all Network Cameras Click the Camera Bar Icon on the upper left corner on the Camera Bar. Operating Instructions Deletes the selected Network Camera from Camera Bar.

  • Page 48: Network Camera Recording

    Operating Instructions 2.4 Network Camera Recording 2.4.1 Setting the Hard Disk Capacity A maximum hard disk capacity for recording can be set. Select [File] • Preferences window appears. Set the lowest hard disk capacity to stop Network Camera Recorder. • We recommend you to set 500 MB or greater to prevent the PC from going down.

  • Page 49: Backing Up The Recorded Image

    2.4.2 Backing up the Recorded Image Recorded images can be backed up automatically at a specified time. Notes • When setting Automatic Backup, it is recommended to select a new folder to save recorded images. Because all data in a specified folder is copied. •...

  • Page 50: Recording The Network Camera

    Operating Instructions 2.4.3 Recording the Network Camera Network Camera Recorder records the images of Network Cameras. Click Camera Preview in the Camera List to select Network Camera. • The frame of the selected Camera Preview turns blue. Click to start monitoring Network Cameras. Click [On] of Recording buttons.
  • Page 51 • An MJP file size recorded at intervals of 0.5 second for an hour is as follows. The image quality is standard. Resolution 640 x 480 320 x 240 160 x 120 * The file size varies depending on the image quality and object situation. File size About 140 MB About 67 MB...

  • Page 52: Motion Detection Recording

    Operating Instructions 2.4.4 Motion Detection Recording Recording can begin automatically when motion is detected. This feature offers a more efficient means of recording. Click Camera Preview in the Camera List to select Network Camera. • The frame of the selected Camera Preview turns blue. Click to monitor Network Cameras.

  • Page 53: Changing Motion Detection Settings

    2.4.5 Changing Motion Detection Settings Motion Detection Settings has two types; default setting and current camera setting. Click Camera Preview in the Camera List to select Network Camera. • The frame of the selected Camera Preview turns blue. Select [Tools] •...

  • Page 54: Timer Recording

    Operating Instructions 2.4.6 Timer Recording You can specify the day of the week and period of time for recording. Timer Recording can be used with Motion Detection Recording. The image in which the motion is detected will be recorded in the specified period of time. Click Camera Preview in the Camera List and select Network Camera.
  • Page 55 Select [Control] • Check mark appears when the timer recording becomes effective. • Network Camera Recorder starts monitoring and recording images automatically in the specified time. Notes • Timer Recording for all Network Cameras stops by clearing the check mark by the [Automatic Timer Operation].

  • Page 56: Playing Back The Recorded Image

    Operating Instructions 2.4.7 Playing Back the Recorded Image Network Camera Recorder can play back JPEG and MJP files of camera images controlling the playback speed. Click Camera Preview in the Camera List to select Network Camera. • The frame of the selected Camera Preview turns blue. Click [Thumbnails] tab •...
  • Page 57 When selecting a JPEG file Playback buttons can display recorded images. displays a first image. displays a previous image. plays back recorded images. • Click displays a next image. (If there is no next image, the latest image is displayed.) displays a latest image.

  • Page 58: Searching For Recorded Image

    Operating Instructions 2.4.8 Searching for Recorded Image Recorded images can be searched for by their recording time. Click , or select [Tools] appears. Set the parameters (period of time for searching/Image File type/Search Results) and click [Search]. A list of searched images appears. When checking [Filename] for Search Results, recorded images will be displayed with their recorded...

  • Page 59: Extracting Jpeg Files From An Mjp File

    2.4.9 Extracting JPEG Files from an MJP File JPEG files can be extracted from an MJP file. Click [Thumbnails] tab. Thumbnail Page appears. Select an MJP file to extract JPEG files. Select [Tools] bar. Extracted images will be displayed on Thumbnail Page. Note Extracted JPEG files are displayed with a filename as shown in the...

  • Page 60: Controlling Playback Speed

    Operating Instructions 2.4.10 Controlling Playback Speed Network Camera Recorder can control the playback speed. You can also control while playing back recorded images. Right-click • The next window appears. Drag the slider and control speed. Click the close button.

  • Page 61: Deleting The Recorded Image

    2.4.11 Deleting the Recorded Image Deleting selected images The unwanted images can be deleted. Click Camera Preview in the Camera List to select Network Camera. • The frame of the selected Camera Preview turns blue. Click [Thumbnails] tab. • Thumbnails Page appears. Select recorded images to delete.
  • Page 62 Operating Instructions Deleting all recorded images All recorded images of selected Network Camera can be deleted. Click Camera Preview in the Camera List to select Network Camera. • The frame of the selected Camera Preview turns blue. Select [File] Click [Yes]. Notes •...

  • Page 63: Practical Operation

    Operating Instructions Section 3 Practical Operation...

  • Page 64: Printing The Recorded Image

    Operating Instructions 3.1 Printing the Recorded Image Network Camera Recorder prints the current displayed image or recorded images. Network Camera Recorder prints maximum 36 images per page. An MJP file must be converted to JPEG files to print. ( Print Setup Print Setup window sets a printer and the number of images per page.
  • Page 65 Operating Instructions Set the number of rows and columns to align recorded images per page. Click [OK]. (E.g., Print nine images per page [three rows and three columns].) (1) Set rows and columns. (2) Click [OK]. • It is possible to set up to six rows and six columns. (Maximum 36 images) Note The page layout can be checked.
  • Page 66 Operating Instructions Printing The specified contents on Page Setup window ( Select the current displayed image or recorded images to print. Select [Print] • When printing queue images meet the specified numbers per page set on Page Setup window, the page will be printed automatically. Select [Print] contents.

  • Page 67: Multi-Camera Recording

    3.2 Multi-Camera Recording Network Camera Recorder records the several Network Cameras simultaneously. Select Network Cameras to record and click [On] or [Motion] to make recording ready for each Network Camera while stopping monitoring. • Camera Name will be red (Recording) or green (Motion Detection Recording).

  • Page 68: Copying Or Moving The Recorded Image

    Operating Instructions 3.3 Copying or Moving the Recorded Image Network Camera Recorder can copy or move recorded images. Click Camera Preview of Network Camera in the Camera List to copy or move recorded images. Click [Thumbnails] tab. • Thumbnails Page appears. Click recorded images to copy or move.
  • Page 69 Select [File] [Copy Selected Images] or [Move Selected Images] on the menu bar. • Select folder window appears. Specify Folder Name and Drive and click [OK]. • Confirmation dialog box appears if the specified folder does not exist. Click [Yes]. Operating Instructions...

  • Page 70: Enabling Or Disabling The Network Camera

    Operating Instructions 3.4 Enabling or Disabling the Network Camera Network Camera Recorder allows you to temporarily enable or disable configured Network Cameras. This allows you to conveniently monitor or record Network Cameras of your choice. Select the Network Cameras to enable or disable. •...

  • Page 71: Creating Avi Motion Video Files

    3.5 Creating AVI Motion Video Files JPEG files can be converted to AVI files. This allows the files to be played back on other PCs or send via e-mail. Click Camera Preview in the Camera List to select Network Camera. •...
  • Page 72 Operating Instructions Specify [Save in] and [File name] and click [Save]. • The compression program varies depending on the operating system. Select a compression program that is installed on the PC. • Compression quality specifies the compression ratio. (If the compression ratio is 100, the file size will be small, but the image quality will be low.

  • Page 73: Renaming And Saving The Image

    3.6 Renaming and Saving the Image Network Camera Recorder can rename and save images. Select a image to rename and save. • The image can be one that is already recorded or one that is being displayed currently. Select [File] Specify a folder and a filename and click [Save].

  • Page 74: Copying To The Clipboard

    Operating Instructions 3.7 Copying to the Clipboard Network Camera Recorder copies the image to the Clipboard. Select a image to copy to the Clipboard. • The image can be one that is already recorded or one that is being displayed currently. Select [File] •...

  • Page 75: Confirming The Version Information

    3.8 Confirming the Version Information Network Camera Recorder shows you the version information. Select [Help] Click [OK] after confirming the version information. [About]. Operating Instructions...

  • Page 76: Default Setting And Troubleshooting

    Operating Instructions Section 4 Default Setting and Troubleshooting...

  • Page 77: Default Setting List

    Camera] Camera Name Description Resolution Image Quality Factory When setting Default value is necessary C:\Program When setting Files\NCR the specified folder Panasonic Depending on HCM series the Network with Pan/Tilt Camera [Blank] Indispensable Cam*** Indispensable (Network Camera Recorder assigns a...
  • Page 78 Operating Instructions Items [Create Capture Type Camera]/ [Edit Current Recording File Camera] Format Recording Timer Operation Day of the week Recording Type Authentication User Name (ID) [Blank] Password Recording Capacity [Proxy Use a proxy Setup] server Proxy address [Blank] Port Proxy Username Proxy...
  • Page 79 Items [Preferences] Show Icon in System Tray Stop cameras if disk space less than Start all cameras when program starts Automatic Backup [Search] Search for Images Target File Format Search Results [Installation] destination folder [Page Setup] Rows and Columns Factory When setting Default value is necessary...

  • Page 80: Troubleshooting

    Operating Instructions 4.2 Troubleshooting Problem Camera images are not displayed. The images of Network Cameras on the Camera Bar does not appear. Cause and Remedy • Network Camera is not working. Try to connect to Network Camera directly using a web browser.
  • Page 81 Problem Network Camera Recorder configures only four Network Cameras and does not record over 30 minutes. Network Camera Recorder does not timer-record the images. The taskbar button does not appear when minimizing Network Camera Recorder. Network Camera Recorder does not start. Cause and Remedy •...
  • Page 82 Network Camera Recorder. Right-click a preset button and click [Refresh]. • Selected camera type is wrong. Select [Panasonic HCM series with Zoom] on Edit Camera window ( • PC does not have enough memory. Reduce the numbers of Network Cameras.
  • Page 83 Problem An MJP file cannot be deleted. Cause and Remedy • The MJP file is now playing back or suspending temporarily. Stop playing back the MJP file. Close Network Camera Recorder and restart it to delete the MJP file. Operating Instructions...

  • Page 84: Index

    Operating Instructions Index...
  • Page 85 Adobe Acrobat Reader Automatic Backup AVI file Camera Bar Camera List Camera Name Camera Preview Camera Type Capture Type Connection Buttons Default Setting List End-User License Agreement Focus Buttons Focusing Hard Disk Capacity Home Position Image Page Image Quality Installation Installation Procedure IP Address JPEG...
  • Page 86 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). Under the applicable copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of PCC.

Table of Contents