Cradlepoint IBR1100 User Manual page 50

User Manual / IBR1100/IBR1150
Global VPN Settings
These settings apply to all configured VPN tunnels.
Enable VPN Service: Enabling VPN Service will
allow you to load a certificate for VPN to the
router.
Certificate Name: Select the Certificate Name.
IKE / ISAKMP Port: Internet Key Exchange
/ Internet Security Association and Key
Management Protocol port. (Default: 500. This
is a standard VPN port that usually does not
need to be changed.)
IKE / ISAKMP NAT-T Port: Internet Key Exchange
/ Internet Security Association and Key
Management Protocol network address translation traversal port. (Default: 4500. This is a standard VPN NAT-T
port that usually does not need to be changed.)
NAT-T KeepAlive Interval: Number of seconds between sending NAT-T packets to keep the tunnel alive if no
other traffic is being sent. (Default: 20 seconds. Range: 0-3600 seconds. 20 seconds will be sufficient in almost
all cases.)
Tunnel Connect Retry: Number of seconds between connection attempts. (Default: 30 seconds. Range: 10-255
seconds. 30 seconds will be sufficient in almost all cases.)
OPEN VPN
OpenVPN is an open source software application that implements virtual private network (VPN) techniques
for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote
access facilities.
NOTE: OpenVPN requires a feature license not included with ECM Prime. Go to SYSTEM > Administration >
Feature Licenses to enable this feature.
Once you have a valid feature license, click Add to
create a new OpenVPN tunnel. Click Edit to make
changes to an existing tunnel.
Add/Edit Tunnel – General
• Tunnel Name – Enter a name to uniquely
identify this tunnel
• Tunnel Mode – Select which mode this tunnel
endpoint is required to be. Choose from the
following:
• Client
• Server
• Device Type - Select between Routed (TUN)
or Bridged (TAP) virtual device.
• Routed creates an interface that can
be used in the Zone Firewall and is fully
routable.
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
7/15/16
50