4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1.
Press
: Select Dry
MODE
2. Press
: Set the desired temperature.
5. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
operation (except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
Hi POWER
6. ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 0.5 degree/
hour for 4 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or stop
without using the remote control.
• Operation mode is set on AUTOMATIC
operation, preset temperature is 24°C
and fan operation is automatic speed.
8. TIMER OPERATION
Setting the ON Timer
1
Press
: Set the desired ON timer.
2
Press
: Set the timer .
3 3
Press
: Cancel the timer .
Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Daily Timer
1
Press
: Set the ON timer.
2
Press
: Set the OFF timer.
•
During the daily timer is activation, both arrows
Note:
Keep the remote control in accessible transmission to the indoor unit;
•
otherwise, the time lag of up to 15 minutes will occur.
The setting will be saved for the next same operation.
•
.
Press
Press
Press
3
Press
Press
4
mark flashing.
(
–
Setting the OFF Timer
: Set the desired OFF timer.
: Set the timer.
.
button during the ( or )
or
)
are indicated.
50
–
FILE NO. SVM-15006