Hi-Power Mode; Fil Ter Indicator - Toshiba RAS-B16N3KV2-E1 Service Manual

Item
18. Hi-POWER
([Hi-POWER] button on the remote controller
Mode
is pressed)
When [Hi-POWER] button is pressed while the indoor
unit is in Auto, Cooling or Heating operation, Hi-
POWER mark is indicated on the display of the remote
controller and the unit operates as follows.
1. Automatic operation
2. Cooling operation
3. Heating operation
4. The Hi-POWER mode can not be set in Dry
19. FILTER When the elapsed time reaches 1000 hours after
Indicator
air conditioner operation, the FILTER indicator lights.
After cleaning the filters, turn off the FILTER indicator.
How to Turn Off FILTER Indicator
Press [RESET] button on the indoor unit.
NOTE :
If [RESET] button is pushed while the FILTER indicator
is not lit, the indoor unit will start the automatic
operation.
Operation flow and applicable data, etc.
• The indoor unit operates in according to the
current operation.
• The preset temperature drops 1ºC
(The value of the preset temperature on the
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
• The preset temperature increases 2ºC
(The value of the preset temperature on the
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
operation
− 46 −
FILE NO. SVM-15006
Description
.