Remote Control - Samsung HLN507W1X/XAA Service Manual

1-20 Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote.
always point it directly at the TV. The remote control can also operate your VCR, cable box, and DVD player.
1. POWER
turns the TV on and off.
2. S.MODE
Adjust the TV sound by selecting one of
the the preset factory settings (or select
your personal,customized picture settings.)
3. P.MODE
Adjust the TV picture by selecting one of
the press factory setting (or select your
personal,customized picture settings.)
4. +100
Press to select cable channels over 100 on
TV
5. VOL-, VOL+
Press to increase or decrease the volume.
6. MUTE
Press to mute the TV sound.
7. FAV.CH (Favorite Channel)
Press to switch between your favorite
channels.
8. MENU
Displays the main on-screen menu.
9. STILL
Press to stop the action during a particular
scene. Press again to resume normal video
10. P.SIZE
Press to change the screen size.
11. MODE
Selects a target device to be controlled
by the Samsung remote control (i.e., TV,
VCR, Cable, or DVD).
12. PRE-CH
Tunes to the previous channel.
13. TV/VIDEO
Press to display all of the available video
sources(i.e., TV, STB, VCR, DVD, DTV, PC).
14. CH and CH
(Channel Up/Down)
Press CH or CH to change chan
nels.
15. INFO
Press to display information on the TV
screen.
16. EXIT
Press to exit the menu.
Samsung Electronics
17. UP, Down, Left, Right
(..., †, œ, √) / ENTER
Press to select highlight up,down,left, or
right. While using the on-screen menus,
press ENTER to activate(or change)a partic
ular item.
18. MTS(Multichannel Television
Stereo)
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
19. SURROUND
Press to hear the Dolby surround effect.
20. ADD/DEL
Press to add or erase channels in the TV's
memory. Use the ADD/DEL button to memo
rize/erase the fine tuning after fine tuning
channels.
21. SLEEP
Press to select a preset time interval for
automatic shutoff.
22. PIP
Activates picture in picture.
23. SET
Used during set up of this remote control,
so that it will work compatibly with other
devices. (VCR, STB, cable box, DVD, etc.)
24. DNIe
Activates DNIe (Digital Natural Image engine).
25. PIP controls
SWAP : Exchanges the video signal that is
currently displayed on the main screen with
the signal in the PIP window.
SIZE : Press to make the PIP window larger
or smaller.
CH(PIP) : Displays the available chanels in
sequence. (These buttons change channels
in the PIP window only.)
26. VCR controls
Controls VCR tape functions : Rewind, Play,
Fast, Forward, Stop, Pause.
27. RESET
If your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 secons. Re-
insert the batteries and try using the remote
control again.
Alignment and Adjustments
1-55