Troubleshooting; Please Do Not Return This Product To The Store - Bissell littlegreen proheat 50Y6 series User Manual

T
roubleshooting
Reduced spray or no spray
Possible Causes
1. Tank release latch is not closed properly
2. Spray nozzle clogged
3. Clean water/solution tank empty
4. Clean water/solution tank insert clogged
5. Pump needs priming
Deep cleaner won't pick up cleaning solution
Possible Causes
1. Poor tool position
2. Dirty water/collection tank is full
3. Tool brush worn
4. Excess solution in vacuum flex hose
5. Incorrect Cleaning Formula
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be
of service. Contact us directly at 1-800-237-7691.
w w w . b i s s e l l . c o m
Remedies
1. Lift up the tank release latch and press
down firmly to make sure it is in place
2. Clean spray nozzle
3. Check/refill tank
4. Clean insert at bottom of
clean water/solution tank
5. Gently lift clean water/solution tank
while depressing the spray
trigger OR gently squeeze clean
tank while depressing spray trigger
Remedies
1. Reposition tool on surface,
follow recommended cleaning
procedures
2. Empty dirty water/collection tank
3. Replace with new brush
4. Lift tool and point upwards
to allow water in hose to
flow into the dirty water/collection tank
5. Use BISSELL 2X compact formulas only
8 0 0 . 2 3 7 . 7 6 9 1
9