Sikkerhedsanvisninger - Powerware 9 Prestige Series User Manual

Safety Warnings

Sikkerhedsanvisninger

VIGTIGE SIKKERHEDSANVISNINGER
GEM DISSE ANVISNINGER
DENNE BRUGERVEJLEDNING INDEHOLDER VIGTIGE
SIKKERHEDSANVISNINGER
6
:
Do not remove or unplug the input cord when the UPS is turned on. This removes
the safety ground from the UPS and the equipment connected to the UPS.
:
To comply with international standards and wiring regulations, the total equipment
connected to the output of this UPS must not have an earth leakage current
greater than 2.75 milliamperes.
:
The wall outlet must be within 2 meters of the equipment and accessible to the
operator. The on/off switch on the UPS does not electrically isolate the internal
parts. Unplug the input cord from the wall outlet when disconnecting the unit for
long periods of time.
:
Please note that the output sockets on the UPS are electrically live whenever the
UPS Output On button is pressed, even if the input cord is disconnected.
:
To reduce the risk of fire, connect the UPS and PPDM only to circuits provided with
30 amperes maximum branch-circuit overcurrent protection.
:
For PowerPass systems with hardwired outputs, overcurrent protection for the
output AC circuit(s) is to be provided by others.
:
For PowerPass systems with hardwired outputs, suitably rated disconnect switches
for the output AC circuit(s) are to be provided by others.
Denne UPS indeholder LIVSFARLIG HØJSPÆNDING. Alle reparationer og
vedligeholdelse bør kun udføres af en AUTORISERET SERVICETEKNIKER. Ingen af
UPS'ens indvendige dele kan repareres af brugeren.
:
Batterier kan udgøre en fare for elektrisk stød eller forbrændinger forårsaget af høj
kortslutningsspænding. De korrekte forholdsregler bør overholdes.
:
Korrekt bortskaffelse af batterier er påkrævet. Overhold gældende lokale regler for
bortskaffelsesprocedurer.
Powerware
F A R E
A D V A R S E L
9 Prestige Series User's Guide (3000 VA)
®
:
www.powerware.com