4.1.2 Initial Settings
The original settings are shown in bold letters in the shaded boxes. Find and mark your desired
selections for programming.
•
If nothing is entered within one minute in the programming mode, the mode returns to the
normal status.
•
To exit the mode at any time, lift the handset.
To enter the programme mode
Press PROGRAM.
Item
Which line do you prefer to
seize when you go off-hook
to make calls?
(Preferred Line Assignment
– Outgoing)
Which line do you prefer to
seize when you go off-hook
to receive calls?
(Preferred Line Assignment
– Incoming)
Which way do you prefer to
dial the One-Touch Dialling
feature?
(Full One-Touch Dialling
Assignment)
Customising Your Phone & System
programming
9
9
input
Dial 99.
Follow programming
input.
Selection
No line
An idle outside line
A pre-assigned outside line
The Intercom line
No line
A ringing line
A pre-assigned outside line
Going Off-hook and then pressing
the One-Touch Dialling button.
Pressing the One-Touch
Dialling button.
4.1 Customising Your Phone (Station Programming)
To programme
To continue
Press STORE.
Programming Input
To exit
Press PROGRAM.
1
1
1
2
Outside line no.
1
3
(01–54)
1
2
1
2
2
Outside line no.
2
3
(01–54)
1
3
3
2
149