3 3 3 3 Basic Operation - Panasonic CU-SA12CKP Operating Instructions Manual

Automatic Operation
1 Press operation selection MODE button, the
cursor key points to AUTO .
2
Press operation OFF/ON button, the operation
lamp of the air conditioner will flash momentarily,
and then lights up.
Notes: 1. During Automatic Operation, the operation
mode will be selected automatically in
accordance with the room temperature.
C
23˚C
Intake air temperature
20˚C
2. During Automatic Operation, the adjustable
temperature range is ±2°C. By pressing
or button, or
remote control display accordingly.
3. During Automatic Operation with AUTO Fan
Speed:
Heating: When the room temperature is low, the fan
will be at low speed. As the room
temperature rising, fan will speed up.
Cooling: Auto Fan Speed will run at a High fan
speed initially. It stops when it reaches the
set temperature. Then, it will start operating
again at Low fan speed. During Cooling and
Soft Dry operations, the fan will start
operating 40 seconds later.
F563553/01-08/EN 5
Heating Operation
1 Press operation selection MODE button, the
cursor key points to HEAT .
2
Press operation OFF/ON button, the operation
lamp of the air conditioner will flash momentarily,
and then lights up.
3 Press or
Notes:
Heat is obtained from outdoor air to warm up
the room. When the outdoor ambient air
temperature falls, the heating capacity of the
Cooling Operation
unit might be reduced.
Soft Dry Operation
Defrosting Operation
Heating Operation
Depend on the outdoor temperature, the
operation occasionally stops to melt the frost
on the outdoor unit.
will appear in the
button to set the room temperature.
5/6/02, 10:34 am
Cooling Operation
1 Press operation selection MODE button, the
cursor key points to COOL .
2
Press operation OFF/ON button, the operation
lamp of the air conditioner will light up.
3 Press or button to set the room temperature.
Note: When setting the automatic airflow during
Cooling Operation, changes in speed and
movements of louvers, which swing in up and
down manner forms a natural breeze condition.
Soft Dry Operation
1
Press operation selection MODE button, the
cursor key points to DRY .
2 Press operation OFF/ON button, the operation
lamp of the air conditioner will light up.
3
Press or button to set the room temperature.
Notes: 1. The purposes of Soft Dry Operation : to
maintain the room temperature at the set
temperature, prior to dehumidification.
2. When setting the automatic airflow during Soft
Dry Operation, changes in speed and
movements of louvers, which swing in up and
down manner forms a natural breeze condition.
3. During Soft Dry Operation, the fan will run
at Low fan speed, and on/off operation will
occur occasionally.
Recommendation : Select this mode in the rainy day
or when the humidity is high.
4