Screen Saver Mode; Symbols Used In These Operating; Instructions; Turning The Power On/Off - Panasonic KX-TG8301NZ Operating Instructions Manual

Preparation
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.

Screen saver mode

The backlight goes dark when on a
call or turns off completely after 1
minute of inactivity if the handset is not
on the base unit or charger.
Activate the handset display again by:
– pushing the joystick left {<} or right
{>} when on a call.
– pressing {ih} at all other times.
Symbols used in these
operating instructions
Symbol Meaning
{ }
The words in the
brackets indicate button
names on the handset
and base unit.
Example:
Unit keys: {C}, {ih}
i
Proceed to the next
operation.
" " The words in quotations
indicate the menu on the
display.
Example:
"Auto Talk"
{V}/{^}:
Push the joystick down
" " or up to select the words
in quotations.
Example:
{V}/{^}: "Off"
14
Turning the power
on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Setting up the unit
before use
Display language
K (centre of joystick) i N i
1
M
{V}/{^}: "Display Setup" i
2
M
{V}/{^}: "Select Language" i
3
M
{V}/{^}: Select your desired
4
language. i M i {ih}
Note:
L If you select a language you cannot
read: {ih} i K i N i M
i Push the joystick down 2 times.
i M i Push the joystick down 4
times. i M i {V}/{^}: Select
your desired language. i M i
{ih}