Sanyo SAP-URV246EH Instruction Manual page 27

Inverter-controlled split system air conditioner
Hide thumbs Also See for SAP-URV246EH:
Table of Contents

Advertisement

MODELS FTRV-FRV
AIR FILTER
The air filter behind the air intake grille should be checked and cleaned at least once every two weeks.
HOW TO REMOVE THE FILTER
1
2
1.Grasp both ends of the air intake grille and pull to open it.
2.Hold the air filter and pull it upward. Clean the air filter.
3.When replacing the filter, make sure that the FRONT mark is facing you. Reinsert the filter into place and close the air
intake grille.
HOW TO REMOVE THE FILTER
MODELS URV
Air Filter
1.
FILTER CLEANING
Use a vacuum cleaner to remove light dust. If there is
sticky dust on the filter, wash the filter in lukewarm, soapy
water, rinse it in clean water, and dry it.
3
Hold the air filter by the tab at the
top and then pull upwards. Clean the
air filter and replace it.
The air filter should be cleaned at least once every six months or
more frequently; it depends on the real operation conditions.
HOW TO REMOVE THE FILTER
2.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents