Table of Contents
Advertisement
R button
Pressing {R} allows you to use special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
L To change the flash time, see page 17.
For Call Waiting service users
To use Call Waiting, you must subscribe to the Call
Waiting service of your service provider/telephone
company. This feature allows you to receive calls
while you are already talking on the phone. If you
receive a call while on the phone, you will hear a
Call Waiting tone. Please contact your service
provider/telephone company for details and
availability of this service in your area. Press {R} to
answer the 2nd call.
L To switch between calls, press {R}.
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press {#} for about 2 seconds
in standby mode.
L p is displayed.
L To turn key lock off, press {#} again for about 2
seconds in standby mode.
Note:
L Calls to emergency numbers cannot be made
until key lock is turned off.
Temporary tone dialling (for rotary/pulse
service users)
You can temporarily switch the dialling mode to
tone when you need to access touch-tone services
(e.g., telephone banking services).
1
Make a call.
2
Press {*} when prompted to enter your code
or PIN, then press the appropriate dial keys.
Note:
L The dialling mode will return to pulse when you
hang up.
Making/Answering Calls
C
Answering calls
1
Lift the handset and press {C} or {s} when
the unit rings.
L Speakerphone cannot be used when the
headset is connected.
2
When finished talking, press {i} or place the
handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the handset
off the base unit. You do not need to press {C}.
To turn this feature on, see page 15.
Adjusting the handset ringer volume when
receiving a call
Press {^} or {V}.
Temporary ringer off
While the handset is ringing for a call, you can turn
the ringer off temporarily by pressing {i}.
Silent mode
To switch off the ringer, press and hold {*} when
in standby mode until ~ shows on the display.
L When an incoming call is received, only k
flashes on the display to indicate an incoming
call. To switch on the ringer, press and hold {*}
when in standby mode until ~ disappears from
the display.
Note:
L Even if silent mode is set, the handset will ring
for paging.
Handset locator
Using this feature, you can locate the handset if it
has been misplaced.
1
Press {x} on the base unit.
2
To stop paging, press {x} on the base unit or
press {i} on each handset.
13
Advertisement
Table of Contents
