Base Unit Settings - Panasonic KX-TG8070HK Operating Instructions Manual

Base unit settings

To customise the base unit:
1
{MENU} (right soft key)
2
Select h by pressing {^}, {V}, {<}, or {>}. i {OK}
3
Enter the base unit PIN (Personal Identification Number; default: "0000"). i {OK}
4
Press {^} or {V} to select the desired item in the base unit settings menu. i {OK}
5
Press {^} or {V} to select the desired item in the sub-menu. i {OK}
6
Press {^} or {V} to select the desired setting then press {OK}.
L This step may vary depending on the feature being programmed.
L To exit the operation, press {i}.
Note:
L Use the handset to customise the base unit.
L The selected item is highlighted on the display. The currently activated setting is indicated by "t"
located on the left of the item on the display.
Menu
Ringer Setup
Call Options
Base Unit PIN
*1 Change the flash time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you store the PBX access number, a pause will be added automatically between the PBX access
number and the first digit of the phone number when you make calls.
*3 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.
*4 If you forget your PIN, consult your nearest Panasonic service centre.
Sub-menu
Ringer Volume
Ringtone
Dial Mode
Recall/Flash
PBX Access No.
—
h
Details (default setting)
For base unit ("Volume 3")
("Ringtone 1")
("Tone"): page 11
Flash time ("400 msec.")
Enter the 1-digit code. i {OK}
Change base unit PIN ("0000").
– Enter the new 4-digit base unit PIN.
{OK}
– Enter the new 4-digit base unit PIN again.
i {OK}
Base Unit Settings
*1
*2
*3
*4
i
17