Assembly - Electrolux Z4680 SERIES Owner's Manual

HOW TO ASSEMBLE
CAUTION: Assemble the cleaner before using.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Handle
CAUTION: Do not catch cord under handle.
2
1. From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.
2. Attach handle with two 1 inch screws in the assembly
packet. Use either a slotted or Phillips
screwdriver.
NOTE: Hand tighten with screwdriver to be sure both
screws are firmly seated.
1
Groove
Step B Attach Hose
Groove
Hose Retainer
3. From front of cleaner, insert hose adapter into opening
on top of unit. Make sure the button on the hose adapter
is secure in the hole on the unit.
4. From back of cleaner, insert the other end of the hose
® head into the hose retainer.
3
Button
Hole
Hose
4
5