Table of Contents
Advertisement
Useful Information
Charger
Available model:
KX-TG6022
1
Drive the screws (not included) into
the wall.
25.4 mm
Screws
(230–240 V AC,
50/60 Hz)
2
Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
Wall mount template for the charger
25.4 mm
32
A
B
C
Headset (optional)
Connecting a headset to the handset
allows hands-free phone
conversations.
Note:
L Only telecommunications compliance
labelled headsets should be plugged
into the headset socket on the
handset.
Switching a call between the headset
and handset speakerphone
To switch to the handset speakerphone,
press {s}.
To return to the headset, press {C}.
Lanyard/strap eyelet
If you have a lanyard/strap (not
included), you can hang your handset
from your neck or wrist. Thread it
through the eyelet as shown and pull to
tighten it.
Advertisement
Table of Contents
