Multi-Unit Operation; Intercom; Handset Locator; Transferring Calls Between Handsets, Conference Calls - Panasonic KX-TG6021NZ Operating Instructions Manual

Multi-unit Operation

Intercom

Available model:
KX-TG6022
Intercom calls can be made between
handsets.
Note:
L If you receive an outside call while
talking on the intercom, you hear 2
tones. To answer the call, press
{OFF}, then press {C}.
L When paging a unit for an intercom
call, the paged unit beeps for 1
minute.
Making an intercom call
{INTERCOM}
1
L To stop paging, press {OFF}.
2
When you finish talking, press
{OFF}.
Answering an intercom call
Press {C} or {s} to answer the
1
page.
2
When you finish talking, press
{OFF}.
Note:
L When the ringer volume is set to off,
the handset rings at a low level for
intercom calls.

Handset locator

You can locate a misplaced handset by
paging it.
1
Base unit:
{LOCATOR}
L The handset beeps for 1 minute.
30
2
To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
Press {OFF}.
Transferring calls
between handsets,
conference calls
Available model:
KX-TG6022
Outside calls can be transferred
between 2 handsets. 2 handsets can
have a conference call with an outside
party.
1
During an outside call, press
{INTERCOM} to put the call on hold.
2
Press the right soft key.
3
Wait for the paged party to answer.
L If the paged party does not answer,
press {C} to return to the outside
call.
4
To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the handset.
To establish a conference call:
Press {Conf}.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {Conf}.
Answering transferred calls
Press {C} to answer the page.
L After the paging party disconnects,
you can talk to the outside caller.