Table of Contents
Advertisement
Programming
Feature
Set recall
*5
time
*6
Set line mode
Store VM
access#
Time
*7
adjustment
(Caller ID
subscribers only)
V.M. access
Voice enhancer
*1 If "System setting" column is checked, you do not need to program the same item
using another handset (KX-TG6022).
*2 If you subscribe to Caller ID service and want to view the caller's information after
lifting up the handset to answer a call, turn off this feature.
*3 KX-TG6022 only
*4 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*5 The recall time depends on your telephone exchange or host PBX. Consult your
PBX supplier if necessary.
The setting should stay at 600 ms unless pressing {RECALL} fails to pick up the
Call Waiting call.
*6 Generally, the line mode setting should not be adjusted. If "Line in use" is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to "A".
*7 This feature allows the unit to automatically adjust the date and time setting when
caller information is received. To use this feature, set the date and time first.
26
Feature
Setting code
code
{0}{5}{2}
{1}: 700ms {2}: <600ms>
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
{0}{5}{3}
{1}: A {2}: <B>
{0}{7}{1}
{4}{2}
{1}: <Caller ID[auto]>
{0}: Manual
{3}
{5}
{1}: On {0}: <Off>
System
setting
–
–
Page
*1
r
17
r
–
r
28
r
–
–
29
–
17
Advertisement
Table of Contents
