Chapter 4: Calibration
Calibration
Boat show
Depth and speed damping
Saving extended calibration
Exit extended calibration without saving
This screen controls access to basic calibration, to protect the settings
from accidentally being changed. Use the speed key (toggle action) to
select the required setting: CAL ON (1) or CAL OFF (0).
This is a simulation program for dealer use only: 1 = ON and 0 = OFF.
Damping controls the rate at which the displayed data is updated. The
selectable range, adjusted using the speed key, is between 1 and 15,
with 1 providing a rapid update and 15 a slow but smooth display
update.
Press and hold depth and speed together for 2 seconds.
Press depth and speed together momentarily.
21