Installing The Biducer Transducer; Cable Connections; Calibration Requirement - Raymarine ST30 Round Bidata Owner's Handbook Manual

14

3.6 Installing the Biducer transducer

The ST30 Round Bidata is supplied with a combined speed and depth
transducer (Biducer). This should be installed in accordance with the
instructions provided.

Cable connections

The cable from the Biducer consists of five cores which should be
connected to the Bidata as follows:
Cable colour
Green
Screen
Red
Blue
Black

3.7 Calibration requirement

Once installation is complete and before you use your instrument, carry
out the calibration procedures detailed in Chapter 4, Calibration.
ST30 Round Bidata Owner's Handbook
Bidata connection
Green SPEED
Grey SPEED
Red SPEED
Blue DEPTH
Black DEPTH