Yamaha RACK Reference Manual page 60

SYMPHONIC (V1.1 and later)
Two-input, two-output symphonic effect.
Parameter Range
Frequency 0.05Hz - 10.00Hz
Depth 0% - 100%
MOD. Delay 1.0ms - 500.0ms
Sync Off, On
Note
-
PHASER (V1.1 and later)
Two-input, two-output 16-stage phase-shift effect.
Parameter Range
Frequency 0.05Hz - 10.00Hz
Depth 0% - 100%
Feedback Gain -99% - 99%
Offset 0 - 100
Phase 0° - 355°
Stage 2 - 16
HPF Thru, 21.2Hz - 8.00kHz
LPF 50.0Hz - 16.0kHz, Thru
Sync Off, On
Note
-
Description
Modulation speed
Depth of modulation.
Delay time of modulation.
Parameter tempo sync.
Value used to calculate the frequency based on the tempo.
Description
Modulation speed
Depth of modulation.
Amount of feedback.
Offset of the phase shifted frequency.
Left/right balance of modulation.
Number of phase shift stages.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Parameter tempo sync.
Value used to calculate the frequency based on the tempo.
M BAND COMP (V1.1 and later)
Two-input, two-output three-band compressor. Each band has solo and gain reduction
metering.
Parameter Range
Low Gain -12.0dB - +12.0dB
Mid Gain -12.0dB - +12.0dB
High Gain -12.0dB - +12.0dB
Total Gain -72dB - +12dB
L-M XOver 21.2Hz - 8.00kHz
M-H XOver 21.2Hz - 8.00kHz
Knee 0 - 5
Low/Mid/High Link Off, On
Low Thr -54dB - 0dB
Low Ratio 1:1 - ∞:1
Low Attack 0ms - 120ms
Low Release 3.34ms - 42.7s
Low Bypass Off, On
Low Solo Off, On
Mid Thr -54dB - 0dB
Mid Ratio 1:1 - ∞:1
Mid Attack 0ms - 120ms
Mid Release 3.34ms - 42.7s
Mid Bypass Off, On
Mid Solo Off, On
High Thr -54dB - 0dB
High Ratio 1:1 - ∞:1
High Attack 0ms - 120ms
High Release 3.34ms - 42.7s
High Bypass Off, On
High Solo Off, On
NOTE
The Make Up parameter is omitted for V3.0 and later.
- 60 -
Configuration screens
Description
Low-band gain.
Mid-band gain.
High-band gain.
Overall gain.
Low-to-mid crossover frequency.
Mid-to-high crossover frequency.
Compressor knee (all bands).
When turned on, the difference in the threshold for low, mid,
and high is maintained. (V3.0 and later)
Low threshold.
Low ratio.
Low attack time.
Low release time.
Compression bypass feature for low.
Solo feature for low.
Mid threshold.
Mid ratio.
Mid attack time.
Mid release time.
Compression bypass feature for mid.
Solo feature for mid.
High threshold.
High Ratio
High attack time.
High release time.
Compression bypass feature for high.
Solo feature for high.
TF Series
Reference Manual