Blind Hem / Lingerie Stitching - Pfaff C1100 Pro Owner's Manual

BLIND HEM/ LINGERIE STITCH
5mm
Wrong side Overcasting
1
stitches
2
4
5
2.5~6.0 1.0~5.0
16:
5mm
19:
20:
1. Fold the fabric as illustrated with the wrong
Wrong side
2. Attach the blindhem foot.
a
3. Adjust the guide (b) by turning the knob (a) so
b
3
4. Sew slowly, guiding the fabric carefully along
5. Turn the fabric over.
52
STITCHES
3.5~6.0
Blind hem/ lingerie for firm fabrics
Blind hem for stretch fabrics
Blind hem for stretch fabrics
Note: It takes practice to sew blind hems.
Always make a sewing test first.
side facing up.
Place the fabric under the foot.
Turn the handwheel toward you (counter
clockwise) by hand until the needle swings
fully to the left. It should just pierce the fold of
the fabric. If it does not, adjust the stitch width
or guide on the presser foot accordingly.
that the guide just rests against the folded
edge of the fabric and the needle just barely
catches the fold as you sew.
the edge of the guide.
Note: If the stitches are too visible on the
right side of the fabric, decrease the width
of the stitch or move the guide to the right.
If the stitches are not catching the fold of
the fabric, increase the width or move the
guide to the left.
1.0~3.0