Table of Contents
Advertisement
Problem
You cannot operate the
answering system with the
handset.
While recording a greeting
message, the unit starts to
ring and stops recording.
During playback, the unit
starts to ring and stops
playback.
The handset does not
display the name and/or
number of the caller whose
message is being played.
General
Problem
The unit does not work.
Cause & Remedy
Someone is operating the answering
system.
You are too far from the base unit. Move
closer to the base unit.
The unit is recording a message.
To answer the call, press
To answer the call, lift the handset off the
base unit or press
from the beginning after hanging up.
To answer the call, lift the handset off
the base unit or press
To resume playback, press
(NEW!MESSAGE/SLOW!TALK)
hanging up.
Place the handset on the base unit
correctly (p. 55).
If the caller is not stored in the Caller
List, the handset will not display the
caller's information.
Cause & Remedy
Check the settings (p. 12–16).
Charge the battery fully (p. 13).
Clean the charge contacts and charge
again (p. 14).
Install the battery properly (p. 68).
Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.
Re-install the battery and place the
handset on the base unit (p. 68).
Try again.
KX-TG2581AL and KX-TG2581NZ are
not designed to be used with rotary
(pulse dialling) services.
.
(TALK)
. Start again
(TALK)
.
(TALK)
after
73
Advertisement
Table of Contents
