Panasonic KX-TG2581ALS, KX-TG2581NZS Operating Instructions Manual page 42

Using the Directory
1 Press
(FUNCTION/EXIT/CH)
2 While the arrow points to "Save
directory", press
The display shows the number of stored items
in the directory.
Enter a name, up to 15 characters using
3
the dialling buttons (p. 43).
To move the cursor, press BACK Ü or
FWD/EDIT á.
If a name is not required, press Ö (Next key)
and go to step 5.
Press
4
Ö
Enter a phone number, up to 22 digits.
5
Each time you press (INTERCOM/CLEAR), a
digit is erased. To erase all digits, press and
hold (INTERCOM/CLEAR).
To move the cursor, press BACK Ü or
FWD/EDIT á.
Press
6
Ö
If you want to change the storing name or
number, press Ñ (Edit key) repeatedly to
reach the desired display and change it.
Press
7
FWD/EDIT á
A beep sounds.
To continue storing other items, repeat from step 2.
To return to the standby mode, press
(FUNCTION/EXIT/CH).
If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 51).
You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
If the display shows "Directory full" in step 2, press (FUNCTION/EXIT/CH).
To erase other stored items from the directory, see page 48.
After the maximum of 50 items has been stored, "Directory full" is also displayed.
For New Zealand Users:
Your telephone company may charge you for a local call if the number
dialled has the area code prefix included. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled
from your telephone. Do not dial the "0" prefix or the area code digit.
42
FWD/EDIT á
(Next key).
(Next key).
(Save key).
.
(Yes key).
H
Save directory
Ringer volume
GF H
=Yes
Directory=
20 items
Enter name
IH G
=Next
Enter name
Tom Jones
IH G
=Next
Enter phone no.
0398765432
IH G
=Next
Tom Jones
0398765432
F H
=Edit =Save
Tom Jones
0398765432