Table of Contents
Advertisement
1
2
1
3
1
2
5
Put the filters back.
Turn the filter A
clockwise to lock it.
Troubleshooting
The appliance does not start or it stops during
operation.
Before you contact the Service, refer to the in-
formation that follows for a solution to the prob-
lem.
10
A
B
2
Remove the filters A
and B from the bottom
of the appliance.
4
Fully clean the filters
below running water.
Cleaning the spray arm
Do these steps to remove and to put the spray
arm back:
1
3
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
thin pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or sol-
vents.
With some problems, different indicators
flash continuously or intermittently at the
same time to show an alarm code.
2
www.zanussi.com
Advertisement
Table of Contents
