Table of Contents
Advertisement
ON-SCREEN FUNCTIONS
• ON-SCREEN
These indicators appear when the button "ON SCREEN" is
pressed while the unit is used as a computer monitor.
If no input signal is present:
Self-test indicator
If the input frequency is located outside the permitted range:
Input error indicator.
• NO SIGNAL
If no input signal is present
(No computer connected, computer power off, etc.)
The indicator appears if one of the buttons "MENU", "F" or
"ON SCREEN" is pressed.
The indicator disappears if the buttons "MENU", "F" or "ON
SCREEN" is pressed again.
• Input frequency -- Error indicator
If the input frequency is located outside the permitted
range
The indicator appears if one of the buttons "MENU", "F" or
"ON SCREEN" is pressed.
(Error frequencies are indicated in red. Frequencies within
the range are indicated white. If the input signal exceeds
the level of XGA mode, fH and fV are indicated in yellow.)
The indicator disappears if the buttons "MENU", "F" or "ON
SCREEN" is pressed again.
POWER MANAGEMENT
If this unit is used with a computer corresponding to VESA-DPMS standard, current consumption
can be reduced. For details, please refer to the following table.
VESA-DPMS signal
APM State
Video signal
ON STATE
ON
STAND-BY
OFF
SUSPEND
OFF
OFF STATE
OFF
APM: Advanced Power Management
To cancel power management mode
This mode can not be set on this unit. The function is permanently active.
The DPMS mode (power management mode) changes according to the input signal received
from the computer.
Important Message
This function is only active if the unit is set to PC mode. For details, please refer to
the computer manual.
Horizontal sync signal
Vertical sync signal
ON
OFF
ON
OFF
State of this unit
Screen
ON
Active
ON
Black out
OFF
Black out
OFF
Black out
Power indicator
Power consumption
Green
Normal
Yellow
< 5 watts
Yellow
< 5 watts
Yellow
< 5 watts
43
Advertisement
Table of Contents
