Manual Tuning - Panasonic TX-15TA1C Operating Instructions Manual

TUNING – MANUAL TUNING

Manual Tuning

TUNER (front panel)
Keep pressing button "F" until "Manual tuning" is displayed.
By pressing button "-" or "+" enter "Manual tuning".
By pressing button "TV/AV" move between "TV System", "Prog" or
"Search".
By pressing buttons "-" or "+" change the programme position to start the
search or change the TV system.
When the required station is found press button "STR" to save the
changes.
To tune in to other programmes, repeat the above procedure or finish the
tuning by pressing button "F".
Note:
If you know the channel numbers of your broadcasting stations, you may use direct channel selection by
using button "C" on the remote control unit to save the channels quickly:
- enter Manual menu;
- pre-set the programme number;
- Press button "C".
- set the channel number with the numbered buttons;
- save with button "AV/TV".
- leave the menu by pressing button "N".
If you want to use direct channel selection in the "Hyperband" (cable TV), press the direct channel selection
button and programme position button ("C" and "-/--") one after the other and set the number with the
numbered buttons. "CH– –" will first appear in the left top corner of the screen, and then "H:– –". For
saving see above.
20
continued