Fade In/Out Functions; Backlight Compensation Function - Panasonic PV-GS400 Operating Instructions Manual

2
Press the Recording Start/Stop Button
or [PHOTO SHOT] Button
recording.
PHOTO
SHOT
(52)
(47)
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA] >>
[EIS] >> [OFF].
≥For other notes concerning this item, see

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually
from a black screen at the beginning of a scene.
1
Keep pressing the [FADE] Button
during the Recording Pause Mode.
STILL
ENTER
(20)
FADE
≥The image fades out gradually.
2
When the image is completely gone, press
the Recording Start/Stop Button
recording.
(47)
3
Release the [FADE] Button
3 seconds after starting recording.
≥The image reappears gradually.
Recording Mode
(47)
Fade Out
(52)
to start Fade Out causes images and sounds to
disappear gradually, leaving a black screen at the
end of a scene.
1
.
-76-
2
(20)
3
≥The still picture cannot fade in or fade out.

Backlight Compensation Function

This prevents the subject from being recorded too
darkly when backlit. (Backlight is the light that
shines from behind the subject being recorded.)
1
(47) to start
(20) about
To Resume Normal Recording
Press the [BACK LIGHT] Button.
≥For other notes concerning this item, see
Keep pressing the [FADE] Button
recording.
STILL
ENTER
(20)
FADE
≥The image fades out gradually.
When the image is completely gone, press
the Recording Start/Stop Button
recording.
(47)
Release the [FADE] Button
Press the [BACK LIGHT] Button
REC
(10)
BACK
LIGHT
≥The [ª] Indication flashes and then is
displayed.
≥The entire screen becomes brighter.
(20) while
(47) to stop
(20)
.
(10) .
ª ª
.
-76-
33