Superior PHK30 Installation And Operation Instructions Manual page 10

ADDING PAN MATERIAL
ADDING PAN MATERIAL
1. Open bag of glowing embers and spread
1. Open bag of glowing embers and spread it
it evenly over burner ramp.
evenly over burner ramp.
2. Open small bag of platinum embers and
2. Open small bag of platinum embers and
place randomly throughout ember bed;
place randomly throughout ember bed;
more heavily near front of ramp.
more heavily near front of ramp.
INSTALLING THE GRATE AND LOGS
INSTALLING THE GRATE AND LOGS
1. Place grate over burner pan where two
1. Place grate over burner pan where two
outer horizontal supports on grate fit into
outer horizontal supports on grate fit into
two pan positioning tabs on outer edges
two pan positioning tabs on outer edges
of pan.
of pan.
2. Place large back log on grate at top tier
2. Place large back log on grate at top tier
(rear) of ramp (see Figure 8).
(rear) of ramp (see Figure 8).
3. Figures 8 and 9 show a suggested log
3. Figures 8 and 9 show a suggested log
arrangement, however you may arrange
arrangement, however you may arrange
logs as you wish. Leave as much open
logs as you wish. Leave as much open
space between logs as possible to mini-
space between logs as possible to mini-
mize flame impingement and sooting.
mize flame impingement and sooting.
Note: Logs may chip if they are handled
Note: Logs may chip if they are handled
roughly or if hit together while being
roughly or if hit together while being
placed.
placed.
10
115425-01F
INSTALLATION
INSTALLATION
Continued
Continued
www.SuperiorFireplaces.US.com
www.fmiproducts.com
Figure 8 - Installing Logs and Grate
Figure 9 - Suggested Log Arrangement
126903-01A
9