Network Connection - Panasonic DMR-XW400 Operating Instructions Manual

Network connection

Following function will be available when this unit is connected to the network.
≥This document is assuming that you already have a broadband connection.
≥This connection is not necessary if following functions are not to be used.
Automatically acquire the
title of the CD
Update the software of this
unit
Telecommunications
equipment (modem, etc)
≥Make the necessary settings in "Network Settings" after connecting. (
[Note]
≥Refer to the operating instructions for the connected device.
≥It may not work properly depending on the equipment or environment used.
≥Depending on the contract with the provider, you may not be able to connect multiple numbers of terminals such as this unit or computers, or an
additional fee might be required.
≥Use only shielded LAN cables when connecting to peripheral devices.
Automatically acquire the title of the CD or the information about the artist. (
Automatically update the software of this unit. (
≥Update of the software can be done from the broadcast too.
Internet
AV OU V OUT
Straight LAN cable
90)
This unit's rear panel
COAXIAL OPTICAL
LA N L A N
AV1
(TV)
DIGITAL DIGITAL AUDIO OUT AUDIO OUT
(PCM/BITSTREAM) (PCM/BITSTREAM)
10BASE-T/
100BASE-TX
AV2 (EXT)
Hub or broadband router
≥When your communication equipment (modem), etc. has no
broadband router functions: Connect a broadband router.
When your communication equipment (modem), etc. has
broadband router functions but there are no vacant ports:
Connect a hub.
≥Use a router that supports 10BASE-T/100BASE-TX.
89)
69)
P R P Y
B COMPONENT COMPONENT
RF RF
VIDEO OUT VIDEO OUT IN IN
RF RF
OUT OUT
R-AUDIO-L VIDEO S VIDEO
RQT9249
95