Copying Still Pictures; Copying All The Still Pictures On The Usb Memory-Copy All Pictures; Copying New Still Pictures On The Sd Card-Copy New Pictures; Copying Using The Copying List - Panasonic DMR-XW400 Operating Instructions Manual

Copying still pictures

[HDD] [RAM] [USB] [SD]
≥Pictures copied from SD card and USB memory will be categorised
according to the shooting date. Pictures without recording date will
be categorised using the creation date.
≥You cannot copy pictures recorded to DVD-R, DVD-R DL, CD-R/
CD-RW.
≥If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum (
stop partway through.
≥You cannot copy the information about the picture rotation.
≥Timer recording will not start while copying still pictures.
Copying all the still pictures on the USB
memory—Copy All Pictures
[USB] > [HDD]
1
While stopped
Insert the USB memory.
The menu is automatically displayed.
USB device
Play Video ( DivX )
Copy AVCHD
Copy Video ( MPEG2 )
Play Pictures ( JPEG )
Copy Pictures ( JPEG )
Play / Copy Music ( MP3 )
USB device is inserted.
≥Display contents differ depending on what is recorded in
each media.
2
Press [3, 4] to select "Copy Pictures
(JPEG)" and press [OK].
Copy All Pictures ( JPEG )
Copy from
Copy to
Copy all pictures ( JPEG ) by date.
Copy
OK
RETURN
3
Press [2, 1] to select "Copy" and
press [OK].
will be displayed on the Pictures by Date screen of the
≥
Direct Navigator for the added pictures.
To stop copying
Press and hold [RETURN] for 3 seconds.
[Note]
≥The structure of folders on the USB memory may not be the same
at the copy destination.
Copying new still pictures on the SD
card—Copy New Pictures
[SD] > [HDD]
This unit saves information about imported still pictures. Therefore, if
still pictures are imported from the same SD card, then only new still
pictures will be imported.
1
While stopped
Insert the SD card.
The menu is automatically displayed.
SD Card
Play AVCHD
Copy AVCHD
Copy Video ( MPEG2 )
Play Pictures ( JPEG )
Copy Pictures ( JPEG )
SD card is inserted.
≥Display contents differ depending on what is recorded in
each media.
RQT9249
62
109), copying will
OK
RETURN
USB
HDD
Cancel
OK
RETURN
2
Press [3, 4] to select "Copy Pictures
(JPEG)" and press [OK].
Copy New Pictures ( JPEG )
Copy from
SD CARD
Copy to HDD
Copy added pictures ( JPEG ) by date.
Copy Cancel
OK
RETURN
3
Press [2, 1] to select "Copy" and
press [OK].
≥Protection of the card is
– Set: Copy will start
– Not set: Go to step 4
4
Press [2, 1] to select "Yes" or "No"
and press [OK].
If "Yes" is selected
Copied pictures in the SD card will be deleted after copying.
If "No" is selected
Pictures will not be deleted.
will be displayed on the Pictures by Date screen of the
≥
Direct Navigator for the added pictures.
To stop copying
Press and hold [RETURN] for 3 seconds.
[Note]
≥This unit saves the information on up to 12,000 still pictures and 30
SD cards. If additional still pictures are imported, then the older
information will be deleted.

Copying using the copying list

[HDD] ,-. [RAM] [SD]
[SD] ,-. [RAM]
[USB] > [HDD] [RAM]
1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "To Others"
and press [OK].
3
Press [3, 4] to select "Advanced
Copy" and press [OK].
Advanced Copy
Cancel All
Source SD CARD
Copy Direction
1
SD CARD  HDD
Destination HDD
Copy Mode
2
PICTURE High Speed
Create List
3
0
Start Copying
Select the copy direction.
RETURN
≥If you are not going to change the registered list press [4]
several times ( step 7).
4
Set the copy direction.
≥If you are not going to change the copying direction, press
[4] ( step 5).
1 Press [3, 4] to select "Copy Direction" and press
[1].
2 Press [3, 4] to select "Source" and press [OK].
3 Press [3, 4] to select the drive and press [OK].
4 Press [3, 4] to select "Destination" and press [OK].
5 Press [3, 4] to select the drive and press [OK].
The same drive as the copy source cannot be copied.
6 Press [2] to confirm.
5
Set the copy mode.
≥If you are not going to change the recording mode, press
[4] ( step 6).
1 Press [3, 4] to select "Copy Mode" and press [1].
2 Press [3, 4] to select "Format" and press [OK].
3 Press [3, 4] to select "PICTURE" and press [OK].
"Recording Mode" is automatically set to "High Speed".
4 Press [2] to confirm.