Replacing The Batteries - Panasonic KX-TCD455E Operating Instructions Manual

455E.book Page 6 Thursday, March 20, 2003 7:44 PM
Setting up
Symbols Used in This Operating Instructions
Symbol
To search for the desired item, press UP or DOWN.
To select the desired item, press RIGHT.
To search for and then select the desired item, press UP or DOWN then
RIGHT.
To move the cursor to the right or to the left, press RIGHT or LEFT.
To go to the next step.
The words in " " indicate the words in display.
" "

Replacing the Batteries

If the icon flashes after a few telephone calls even when the handset batteries have
been fully charged, both batteries must be replaced.
Charge new batteries for approximately 7 hours before initial use.
(The telephone line cord must not be connected to the telephone socket at this
time.)
When replacing the batteries, ensure that the correct battery type is selected.
Selecting the Battery Type
1 2
Press Search/Select
MENU.
"Setting Handset".
5
Search/Select
"Ni-Cd" or "Ni-MH".
• To exit the operation, press
• Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and
start charging, it may cause the leakage of the battery electrolyte.
Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries.
6
Meaning
3
Search/Select
"Other Option".
any time.
4
Search/Select
"Battery Type".