Verifying The Configuration - HP HPE FlexNetwork MSR Router Series Configuration Manual

Verifying the configuration

# Display information about the tunnel bundle interface and its member interfaces on Router A.
[RouterA] display tunnel-bundle
Tunnel-Bundle Name
Bundle State
Bundle Attributes
Bundle Mode
Tunnel Type
Tunnel Destination
Bundle Members :
Member
Tunnel1
Tunnel2
# Display information about the tunnel bundle for the tunnel bundle interface on Router A.
[RouterA] display mpls tunnel all
Destination
4.4.4.4
# Display information about local LSPs for the tunnel bundle interface on Router A.
[RouterA] display mpls lsp protocol local verbose
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Out-Interface: Tun1
BkInterface
# Display MPLS protection group information on Router A.
[RouterA] display mpls protection
Total number of protection-groups: 1
State:
N: Normal
PF: Protecting failure
M: Manual switch
W: Working tunnel failure
L: Local
Group ID
0
: Tunnel-Bundle 0
: Up
:
: 1:1
: CR_LSP
: 4.4.4.4
State
Up
Up
Type Tunnel/NHLFE
CRLSP Tunnel-Bundle0
: 4.4.4.4
: Tunnel-B0
: TE
: Ingress
: -
: 536870912
: Active
: Tun2
UA: Unavailable
WTR: Wait-to-Restore
F: Forced switch
R: Remote
Type Working tunnel
Tunnel bundle 1
Weight Role
1 Working
1 Protection
VPN Instance
-
PA: Protecting administrative
P: Protection tunnel failure
HO: Hold off LO: Lockout of protection
Protection tunnel
2
534
DNR: Do-not-Revert
State
N