Table of Contents
Advertisement
Configuring EBGP between an MCE and a PE
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter BGP-VPN instance
view.
4.
Configure the PE as an
EBGP peer.
5.
Enter BGP-VPN IPv6 unicast
address family view.
6.
Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
7.
Redistribute VPN routes.
8.
(Optional.) Configure filtering
of advertised routes.
9.
(Optional.) Configure filtering
of received routes.
Configuring IBGP between an MCE and a PE
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter BGP-VPN
instance view.
4.
Configure the PE as an
IBGP peer.
5.
Enter BGP-VPN IPv6
unicast address family
view.
6.
Enable BGP to
exchange IPv6 unicast
routes with the peer.
7.
Redistribute the VPN
routes of the VPN site.
8.
(Optional.) Configure
filtering of advertised
routes.
Command
system-view
bgp as-number
ip vpn-instance
vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol [ { process-id |
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number | prefix-list
ipv6-prefix-name } export [ protocol
process-id ]
354
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
N/A
By default, BGP does not
exchange IPv6 unicast routes with
any peer.
By default, no routes are
redistributed into BGP.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.
Remarks
N/A
N/A
N/A
By default, no BGP peer or
peer group is configured.
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.
By default, BGP does not filter
advertised routes.
Advertisement
Table of Contents
