Replacing The Batteries - Panasonic KX-TCD410AL Operating Instructions Manual

Setting up
Symbols Used in This Operating Instructions
Symbol
To search the desired item, press UP or DOWN.
To select the desired item, press RIGHT.
To search and then to select the desired item, press UP or DOWN then
RIGHT.
To move the cursor to the right or to the left, press RIGHT or LEFT.
To go to the next step.
The words in " " indicate the words in display.
" "

Replacing the Batteries

If the icon flashes after a few telephone calls even when the handset batteries have
been fully charged, 2 batteries must be replaced.
Charge new batteries for approximately 7 hours before initial use.
When replacing the batteries, ensure that the correct battery type is selected.
Selecting the Battery Type
1 2
Press MENU.
5
Search/Select
"NI-CD" or "NI-MH".
• To exit the operation, press
• When Ni-Cd batteries are fitted with the "BATTERY TYPE" setting in "NI-MH",
icon will disappear and stop charging even if the handset is on the cradle.
• Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and
start charging, it may cause the leakage of the battery electrolyte.
Please use only Panasonic HHR-4EPT(Ni-MH) or P-4NPT(Ni-Cd) batteries.
8
3
Search/Select Search/Select
"SETTING HS". "OTHER OPT".
any time.
Meaning
4
Search/Select
"BATTERY TYPE".