Advertisement
Network settings
The Network submenu contains options over two pages to configure network communication settings. To access the Network
submenu, highlight Network on the main menu and press the
To configure the network settings for use with DHCP:
Highlight DHCP and press the ◄ or ► Navigation button. The indicator to the right shows a check mark when DHCP is
1.
enabled.
Highlight Host Name: and press the
2.
In the Host Name field, enter a new host name.
3.
]
Press the
Navigation button to temporarily save the setting.
4.
To finalize the pending changes, press the Context button below Apply. To cancel pending changes, press the Context
5.
button below Main.
To configure the network settings with a static IP address:
Ensure DHCP mode is disabled. The indicator to the right of DHCP should show an "X."
1.
Highlight IP Address:, Subnet Mask:, Gateway:, or DNS (IP): and press the
2.
For each field, enter the desired setting.
3.
]
Press the
Navigation button to temporarily save the settings.
4.
Repeat steps 2 through 4 for each option mentioned in step 2.
5.
To finalize the pending changes, press the Context button below Apply. To cancel pending changes, press the Context
6.
button below Main.
Advanced settings
The Advanced submenu contains options to set a setup menu lockout PIN. When enabled, the PIN is required to access any
of the submenus except the Status submenu. To access the Advanced submenu, highlight Advanced on the main menu and
]
press the
Navigation button.
To enable or disable the PIN:
Highlight Menu PIN: and press the ◄ or ► Navigation button to enable or disable a setup menu lockout PIN. When
1.
initially enabled, enter a new PIN.
To enter a new PIN:
Enable the Menu PIN or highlight Set PIN: and press the
1.
Use the Keypad buttons to enter a four digit PIN number. Remember the order in which the buttons are pressed.
2.
To erase the digit to the left of the blinking cursor, press the Context button below Backspace.
•
To cancel the process and remove any pending changes, press the Context button below Cancel.
•
After four digits are entered, enter the same numbers in the same order to confirm the new PIN.
3.
Advanced Configuration
For more advanced configuration of buttons and functions, use Global Configurator Plus and Professional. For design and layout
modifications to the LCD screen, use GUI Designer. See the software help file for more information about the program and how to
use it.
]
Navigation button.
]
Navigation button to edit the host name.
]
Navigation button.
]
Navigation button to edit the field.
3
Advertisement
