Panasonic KX-TC1851ALB Operating Instructions Manual page 45

(›) (‹)
4
Press or
points to "Set recall time".
FWD/EDIT (fl)
5 Press
(›) (‹)
6
Press or
desired time is displayed.
FWD/EDIT (fl)
7 Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥Users in Australia can access Telstra's "EASY CALL" service by having the
recall time set at 100 msec (this is the factory default setting), and then follow
Telstra's "EASY CALL" instructions to operate this service.
≥If you are connected via a PBX, a longer or shorter recall time may be necessary
to use PBX functions (transferring a call etc.). Consult your PBX supplier for the
correct setting.
For Call Waiting Service Users in New Zealand
Make sure the recall time is set to 600 msec for use with Telecom's
Call Waiting Service. Press
while talking.
≥The first call is put on hold and you can answer the second call.
≥To return to the first caller, press (RECALL) again.
≥Your telephone company may not support the second caller display
feature.
repeatedly until the arrow
(Yes key).
repeatedly until the
(Save key).
(RECALL)
if you hear a call-waiting tone
Save DIRECT#
1Set recall time
1=Yes
4 3
Recall time
:100ms
1=Save
4 3
45