Table of Contents
Advertisement
≥If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 43) in step 5.
≥You can exit the programming mode any time by pressing
(FUNCTION/EXIT/CH).
≥If the display shows "Directory full" in step 2, the display will return to
step 1. Press (FUNCTION/EXIT/CH) to exit the list. To erase other stored
items from the directory, see page 41.
For New Zealand Users:
Your telephone service provider may charge you for a local call
when it is dialled with an area code prefix. If the charge for local call
is unacceptable, only the 7-digits of the local number should be
dialled from your telephone. Do not dial the "0" prefix or the area
code digit.
"
35
Advertisement
Table of Contents
