General
Problem
The unit does not work
You cannot program items,
such as the dialing mode
Previously programmed
information is erased
"Recharge battery"
displayed on the handset,
beeps intermittently
You charged the battery
fully, but
"Recharge
is still displayed
battery"
and/or " (
flash
78
Remedy
*Charge the battery fully (p 11)
again (p 12)
*Install the battery properly (p 71)
unplug the AC adaptor to reset Plug in,
and try again
l
Re-install the battery and place the
handset on the base unit (p 71) Try
again
*Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory
list, or while the answering system is in
use
programming
*Move closer to the base unit
*Make sure that the unit is in the standby
mode
information may be erased Reprogram
if necessary
again (p 12)