Temporary Tone Dialing; Flash Button; Selecting The Flash Time - Panasonic KX- TG2583B Operating Instructions Manual

Temporary Tone Dialing

(For Rotary or Pulse Service Users)
Press before entering access numbers which require tone dialing
dialing mode changes to tone You can enter numbers to access an
answering service, electronic banking service, etc When you hang up, the mode
will return to pulse
*Access numbers entered after pressing
redialing

FLASH Button

Pressing [FLASH/CALL WAIT/PLAYBACK)
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting

Selecting the flash time

The flash time depends on your telephone exchange or host PBX
You can select the following flash times "700, 600, 400, 300, 2.50, 110,
100 or 90 ms (milliseconds)" Your phone comes from the factory set to
"700 ms" Make sure the unit is in the standby mode initially.
1
Press
2
Press @I or @ repeatedly until the arrow points to "Program", and
press
3
Press @ or @I repeatedly until the arrow
points to "Set flash time", and press
4
Press f?J or @ repeatedly until the
desired time is displayed, and press
return the standby mode, press (FUNCTION/EXIT/CH)
*If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call etc ) Consult your PBX supplier for the correct
setting
or
key)
key)
will not be included when
(CALL WAIT/FLASH]
Flash time
allows