Erasing Messages; Erasing All Messages - Panasonic KX TG2382PW Operating Instructions Manual

During playback
To repeat Press
•If you press within 5 seconds of playback, the previous
message
message will be played.
To skip Press
message
To stop Press
•To resume playback, press the (MESSAGE!PLAYBACK).
operation
•If you do not press any button for 60 seconds or if you press
(STOP) again, the playback mode will be canceled.

Erasing Messages

The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
—"Memory full" is heard.
—" " is displayed on the base unit.
FULL
—the ANSWER ON indicator flashes rapidly (only when the Answering
System is on).
Erase some, or all, of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
(ERASE)
Press while the message you want to erase is being played
(p. 50).
•A short beep will sound and the message will be erased.
•The unit will continue to play the next message.

Erasing all messages

All recorded messages, except the greeting message, can be erased at
one time.
(ERASE)
Press
•"To erase all messages, press ERASE again" is heard.
Within 5 seconds, press
•A beep sounds and "No messages" is heard.
•The base unit display shows "0".
•The information in the Caller List will not be erased. To erase Caller List
information, see page 36.
For assistance, please call: 1-800-211-PANA(7262)
(REPEAT)
.
(SKIP)
.
(STOP)
.
.
(ERASE)
again.