How To Use The Pause Button (For Pbx Line/Long Distance Calls); Flash Button - Panasonic KX TG2382PW Operating Instructions Manual

How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press
dialing with a PBX or to make a long distance call.
Ex. Line access number
(9) (PAUSE/REDIAL)
•Pressing (PAUSE/REDIAL) once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
•Pressing (PAUSE/REDIAL) more than once increases the length of the pause
between numbers.

FLASH Button

(FLASH/CALL!WAIT)
Pressing
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
•Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing
mode or the mute (p. 46).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110, 100
or 90 ms (milliseconds)". Your phone comes from the factory set to "700 ms".
Make sure the unit is not being used and the handset is lifted off the base unit.
(MUTE/FUNCTION)
Press
Ö Ñ
or , and press
Scroll to "Set tel line" by pressing
Ö Ñ
or , and press
Scroll to "Set flash time" by pressing
Ö Ñ
or , and press
•The current setting is displayed.
Select the flash time by pressing
á
Press (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
For assistance, please call: 1-800-211-PANA(7262)
(PAUSE/REDIAL)
(9)
(PBX)
Phone number
allows you to use special features of your
and scroll to "Initial set" by pressing
á
.
á
.
á
.
Ö
or
if a pause is required for
Caller ID edit
Set tel line
Set answering
Set dial mode
Set flash time
Set line mode
Ñ
.
Set flash time
:700ms
=Save