Date And Time - Panasonic KX TG2258PW Operating Instructions Manual

Programmable Functions

Date and Time

" " flashes on the base unit display if the clock has not been
set. Set the clock by following the steps below.
1
Press [MENU].
2
Scroll to "Date and time" by pressing [ ] or
[ ], then press Select.
3
Enter 2 digits each for month, day, and
1
year. (Ex. To set Apr. 7, 2003, enter "04 07
03".)
Enter 4 digits for time (hour and minute). (Ex.
2
To set 9:30, enter "0930".)
• If you enter a wrong number, press [ ] or [ ] to
move the cursor to the incorrect number. Enter the
correct number.
4
Select "AM" or "PM" by pressing AM/PM.
5
Press Save, then press [OFF].
• The clock is set and "
base unit display.
• If 3 beeps sound after pressing Save, the setting
is not correct. Start again from step 3.
• When entering the time in step 3, you cannot enter numbers greater than 12. Do
not use military time. (To set 13:00 hours, enter "0100", then select "PM" in
step 4.)
If a power failure occurs, the time setting may be incorrect. When "
on the base unit display, adjust the date/time.
To check the date/time, repeat steps 1 and 2 above.
• The current date/time is displayed. When finished, press [OFF].
For Caller ID service users (p. 27)
• Caller ID information will reset the clock after the first ring if the adjusted time is
incorrect.
• If the time has not previously been set, Caller ID information will not adjust the
clock.
• Caller ID information will automatically adjust the clock for daylight saving time.
12
Handset
" disappears from the
Date and time
Exit Select
1
Date:12.31.2003
Time:12:00 AM
AM/PM Save
Example
Date:04.07.2003 0
Time:09:30 AM
AM/PM Save
Date:04.07.2003
0
Time:09:30 AM
AM/PM Save
" flashes