Panasonic BT-LH2600W Operating Instructions Manual page 23

Main Menu
(continued)
g Restrictions on various FUNCTION settings
Under the following conditions, various settings are disabled.
Setting Disabling condition
HV DELAY
In SUB WINDOW, WFM or PIXEL TO PIXEL mode, "INVALID FUNCTION" is displayed and the
setting is disabled.
When "YP
displayed and the setting is disabled.
AUTO
When "YP
SETUP
COMP. CH" is displayed and the setting is disabled.
When "YP
"INCOMPLETE" is displayed and the setting is disabled.
GAMMA
When GPI item is set, "INVALID FUNCTION" is displayed and the setting is disabled.
SELECT
When "YP
displayed and the setting is disabled.
SD ASPECT
When GPI item is set, "INVALID FUNCTION" is displayed and the setting is disabled.
When SUB WINDOW (still picture) or HD display (including PIXEL TO PIXEL) is on, "INVALID
FUNCTION" is displayed and the setting is disabled.
SCAN
When GPI item is set, "INVALID FUNCTION" is displayed and the setting is disabled.
In SUB WINDOW or PIXEL TO PIXEL mode, "INVALID FUNCTION" is displayed and the setting
is disabled.
SUB
When "YP
WINDOW
FUNCTION" is displayed and the setting is disabled.
When "RGB-COMP." is selected in SUB WINDOW with a motion picture on, the screen turns SINGLE.
When an item other than "RGB-COMP." is selected, two motion pictures are displayed on the
screen. When a still picture is on, blackout occurs.
WFM
In SUB WINDOW or PIXEL TO PIXEL mode, "INVALID FUNCTION" is displayed and the setting
is disabled.
When "YP
FUNCTION" is displayed and the setting is disabled.
MARKER
When "YP
displayed and the setting is disabled.
When GPI item is set or in SUB WINDOW mode, "INVALID FUNCTION" is displayed and the
setting is disabled.
PIXEL TO
When "YP
PIXEL
FUNCTION" is displayed and the setting is disabled.
In SUB WINDOW mode, "INVALID FUNCTION" is displayed and the setting is disabled.
PIXEL POS.
When PIXEL TO PIXEL is OFF, "PIXEL TO PIXEL OFF" is displayed and the setting is disabled.
When PIXEL TO PIXEL is 720P display, the position becomes CENTER.
When the display position is not CENTER in PIXEL TO PIXEL mode during 1080P display and
the 720P signal is selected, the display position moves to CENTER.
MONO
When GPI item is set, "INVALID FUNCTION" is displayed and the setting is disabled.
g Operation items displayed when a FUNCTION button is used
When any of the buttons, [FUNCTION1] to [FUNCTION5], is pressed, the following messages are displayed
according to the operation assigned to the pressed button.
• HV DELAY
DELAY OFF, V DELAY, H DELAY, HV DELAY
• AUTOSETUP
COMPLETE: Display for completion
INCOMPLETE: Display for incompletion
NOT RGB-COMP. CH
• GAMMA SELECT
GAMMA STANDARD, GAMMA FILM,
GAMMA STDIO/PST
• SCAN
NORMAL SCAN, UNDER SCAN
• SUB WINDOW
SINGLE, FULL/PART, STILL
P /RGB" set in "INPUT SELECT" menu is "RGB-COMP.", "INVALID FUNCTION" is
B R
P /RGB" set in "INPUT SELECT" menu is other than "RGB-COMP.", "NOT RGB-
B R
P /RGB" set in "INPUT SELECT" menu is "RGB-COMP." and there is NO SIGNAL,
B R
P /RGB" set in "INPUT SELECT" menu is "RGB-COMP.", "INVALID FUNCTION" is
B R
P /RGB" set in "INPUT SELECT" menu is other than "RGB-COMP.", "INVALID
B R
P /RGB" set in "INPUT SELECT" menu is "RGB-COMP." or "RGB-VIDEO", "INVALID
B R
P /RGB" set in "INPUT SELECT" menu is "RGB-COMP.", "INVALID FUNCTION" is
B R
P /RGB" set in "INPUT SELECT" menu is "RGB-COMP." or "RGB-VIDEO", "INVALID
B R
• MARKER
MAKER OFF, 4:3 MARKER, 13:9 MARKER,
14:9 MARKER, VISTA MARKER,
CNSCO MARKER, 95% MARKER, 93% MARKER,
90% MARKER, 88% MARKER, 80% MARKER
• PIXEL TO PIXEL/PIXEL POSITION
CENTER, LEFT TOP, LEFT BOTTOM,
RIGHT TOP, RIGHT BOTTOM
PIXEL TO PIXEL OFF
• LEVEL METER
METER OFF, METER 2CH, METER 4CH,
METER 8CH
23