Panasonic BT-3DL2550E Operating Instructions Manual page 30

Main Menu
(continued)
Sub menu Setting
*1
0 - 30
SHARPNESS H
SHARPNESS V
0 - 30
*1
2D ONLY
*1*2
MODE2
I-P MODE
MODE1
2D ONLY
*1
OFF
MONO
ON
*1*3
OFF
ANAMO
ON
2D ONLY
*1
4:3
SD ASPECT
16:9
2D ONLY
*1
NORMAL
SCAN
2D ONLY
UNDER
COLOR GAIN R
0 - 30
COLOR GAIN B
0 - 30
*1 These functions are not available when "RGB-COMP." under "YP
selected in the "INPUT SELECT" menu (
*2 To use the "TWO WINDOW" (
1) Change settings after exiting the "TWO WINDOW" function.
2) It is recommended to use "MODE2" for handling fast video.
*3 "SCAN" changes are not reflected in Anamo size display.
IP mode
"MODE1" performs IP conversion using inter-frame interpolation.
The factory default is "MODE1".
"MODE2" performs IP conversion using inter-field interpolation.
Since interpolation is performed inside each field, this mode is suitable for checking interlace status.
30
Description
Sets horizontal outline correction. The item display moves to the lower
part of the screen during adjustment. Both the main window and sub-
window can be set up in the split-screen display of the "TWO
WINDOW" function.
Sets vertical outline correction. The item display moves to the lower
part of the screen during adjustment. Both the main window and sub-
window can be set up in the split-screen display of the "TWO
WINDOW" function.
Selects IP conversion mode. (
window and sub-window can be set up in the split-screen display of
the "TWO WINDOW" function.
<MODE2> Inter-field interpolation
<MODE1> Inter-frame interpolation
Switches between color and monochrome (MONO).
<OFF> Color
• When ON, the CHROMA setting of the picture/volume adjusting menu
is fixed at 0.
With an Anamo lens and HD-SDI input, the picture is resized to
Anamo magnification (the vertically enlarged signal can be vertically
compressed and corrected for display). Can be set in the split screen
display of the "TWO WINDOW" function, but operation is disabled.
Sets the aspect ratio for SD signal input. Can be set in the split screen
display of the "TWO WINDOW" function, but operation is disabled.
<4:3> 4:3 display
Sets under-scan and normal display. Can be set in the split screen
display of the "TWO WINDOW" function, but operation is disabled.
<NORMAL> Normal display
This fine tunes the GAIN of the R component. The R component of the
sub-window can be set in the split-screen display and sub-window
display (single screen) of the "TWO WINDOW" function in 2D mode. In
3D mode (COMPARISON), the R component of SDI2 (R) can be set.
This fine tunes the GAIN of the B component. The B component of the
sub-window can be set in the split-screen display and sub-window
display (single screen) of the "TWO WINDOW" function in 2D mode. In
3D mode (COMPARISON), the B component of SDI2 (R) can be set.
page 40).
page 44) function,
page 30, "IP mode") Both the main
<ON> Monochrome
<16:9> 16:9 display
<UNDER> Under-scan
P /RGB" or "DVI-COMP." under "DVI-D" is
B R