Panasonic BT-3DL2550E Operating Instructions Manual page 24

Main Menu
(continued)
3D
Sub menu Setting
SYSTEM
3D
2D
3D INPUT TYPE
SIMUL
LINE BY LINE
3D ONLY
SIDE BY SIDE
SIMUL MODE
LINE BY LINE
OVERLAY
3D ONLY
SDI1(L)
SDI2(R)
COMPARISON
H MIRROR
OFF
ON
3D ONLY
H SHIFT -128 - 127
3D ONLY
(Factory
default: o)
24
Description
Switches between 2D and 3D
<2D> Sets monitor to work in 2D mode
<3D> Sets monitor to work in 3D (spectroscopic) mode
Selects the input type in 3D mode.
<SIMUL>
<LINE BY LINE>
<SIDE BY SIDE>
Selects the display method when SIMUL is selected.
<LINE BY LINE>
<OVERLAY>
<SDI1(L)>
<SDI2(R)>
<COMPARISON>
This option horizontally inverts the signal from SDI2 when "LINE BY
LINE" or "OVERLAY" is selected in SIMUL mode.
This can be used when checking left/right signals.
<OFF> Signal not inverted.
<ON> Signal inverted.
Shifts the SDI2 signal horizontally when <LINE BY LINE> or
<OVERLAY> is selected in SIMUL mode.
The value of this setting is retained until the power is turned off. It is reset
to "0" when the power is turned off and then on again.
Underlined values indicate factory defaults.
Uses the signals input from SDI1 and SDI2.
Ensure that the left-eye signal (L) is connected
to SDI1, and the right-eye signal is connected to
SDI2 (R).
When this input type is selected, the SIMUL
MODE noted below becomes active.
When SIMUL is selected the input signal from
SDI1 is used as the base and a phase difference
of up to 15 gs with the SDI2 input signal is
allowed.
Uses a signal with the left-eye and right-eye
signals split line by line.
The left-eye signal is displayed on the left hand
side of the screen, the right-eye signal on the
right side of the screen. A horizontally time
compressed signal is used for both.
Displays in 3D (stereoscopic).
Mixes and displays the left-eye and right-eye
signals.
Displays only the signal from SDI1
Displays only the signal from SDI2
Displays the signal input from SDI1 on the left
side of the screen, and the signal input from
SDI2 on the right side of the screen.
Both images are the same size and the aspect
ratio is 16:9. The MARKER function is
unavailable.