To Resume Speed; To Vary The Speed Setting - Dodge DART 2015 Owner's Manual

Hide thumbs Also See for DART 2015:

Table of Contents

248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Resume Speed

To resume a previously set speed, push the RES (+)

button and release. Resume can be used at any speed

above 20 mph (32 km/h).

To Increase Speed

When the Electronic Speed Control is set, you can in-

crease speed by pushing the RES (+) button.

The drivers preferred units can be selected through the

instrument panel settings if equipped. Refer to "Under-

standing Your Instrument Panel" for more information.

The speed increment shown is dependant on the chosen

speed unit of U.S. (mph) or Metric (km/h):

U.S. Speed (mph)

• Pushing the RES (+) button once will result in a 1 mph

increase in set speed. Each subsequent tap of the

button results in an increase of 1 mph.

• If the button is continually pushed, the set speed will

continue to increase until the button is released, then

the new set speed will be established.

Metric Speed (km/h)

• Pushing the RES (+) button once will result in a

1 km/h increase in set speed. Each subsequent tap of

the button results in an increase of 1 km/h.