Table of Contents
Advertisement
Uconnect® Phone will then send the corresponding
phone number associated with the phonebook entry,
as tones over the phone.
NOTE:
• You may not hear all of the tones due to mobile phone
network configurations. This is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In — Overriding Prompts
The "Voice Command" button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking "Would you like to pair a phone, clear a...," you
could push the Voice Command
"Pair a Phone" to select that option without having to
listen to the rest of the voice prompt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect® Phone
will not repeat a phone number before you dial it).
1. Push the Phone
2. After the "Ready" prompt and the following beep, say
one of the following:
• "Setup Confirmation Prompts On"
• "Setup Confirmation Prompts Off"
Phone And Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your mobile phone, the Uconnect® Phone will provide
notification to inform you of your phone and network
button and say,
status when you are attempting to make a phone call
button to begin.
3
Advertisement
Chapters
Table of Contents
