Table of Contents
Advertisement
Laser Safety
CAUTION
Any operations or adjustments not stated in the operation manual may cause hazardous light
exposure and eventually burn injuries or loss of eyesight.
This product has been tested and found to comply with the Class 1 Laser Equipment
requirements defined by the international standard IEC60825-1:2007 and has no light exposure
hazard. The product has no hazardous light emission as it features light protection components
and covers to shut in all light beam during operation and maintenance.
Internal Laser radiation
Wave length: 770 - 800 nm
Output: 25 mW max.
Laser Class: Class 3B
CAUTION
Always follow all warning instructions marked on or supplied with this product.
To avoid the risk of burn injuries and electric shock, never touch the area with the "High
Temperature" or "High Voltage" marks on.
Keep electrical and mechanical safety interlocks active. Keep the safety interlocks away from
magnetic materials. Magnetic materials may accidentally activate the product and cause injuries
or electric shock.
Do not attempt to remove a paper jammed deeply inside the product, particularly a paper
wrapped around a heat roller. Otherwise, it may cause injuries or burns, and even worse, may
generate smoke if you keep operating the product with a paper jammed.
Switch off the product promptly and contact your local Fuji Xerox representative for more
information.
Do not apply excessive force to hold thick document on the document glass. It may break the
glass and cause injuries.
Ventilate well during extended operation or mass copying. It may affect the office air environment
due to odor such as ozone in a poorly ventilated room.
Provide proper ventilation to ensure the comfortable and safe environment.
Consumable
WARNING
Store all consumables in accordance with the instructions given on its package or container.
xii
Hide quick links:
Advertisement
Table of Contents
