Airlink101 AR686W User Manual page 87

Static Routing
Destination
Subnet Mask
Gateway
Hop
Enable
Click on Save after you've finished all settings.
Select Enable or Disable to enable or disable Static Routing
function.
Enter a destination IP address. The Destination IP is the address
of the remote network or host to which you want to assign a static
route.
Enter the subnet mask. The Subnet Mask determines which
portion of a Destination IP address is the network portion, and
which portion is the host portion.
Enter the gateway IP address. This is the IP address of the
gateway device that allows for contact between the Router and
the remote network or host.
Specify the number of next hop.
Check or uncheck Enable box to enable or disable the static
routing rule.
83